John Deere AUC12916 Lawn Tractor Oil Filter for 100 Series E/S120-180 X166/7R
$27.99
Skip to product information
- 【Dry Oil Filter】This is a dry oil filter with no pre‑filled oil; install only when the engine is off and fully cooled, use manufacturer‑specified engine oil, re‑check the oil level after installation, and never run the engine without oil as it will cause serious engine damage
- 【Vehicle Fitment】Engine Oil Filter Fit for John Deere 100 Series lawn tractors ,including E120, E130, E150, E160, E170, E180, S120, S130, S160, S170, S180 , as well as X166R, X167, and Z365R Replaces AUC12916
- 【High-Efficiency Filtration Media】Constructed with blended cellulose and synthetic fiber filter media; traps fine metal shavings, carbon deposits and yard debris while maintaining steady oil flow; reduces premature engine wear and extends overall motor service life for seasonal mowing use
- 【Benefits】This dry filter design contains no factory pre-filled oil, so you can add manufacturer-approved motor oil matched to your equipment. It eliminates potential engine harm from stale, oxidized preloaded oil inside pre-filled filter assemblies. You get full control over oil quality to deliver long-lasting protection for your engine
- 【Installation Steps】1. Shut off engine and let it cool completely.2. Drain old oil (for full oil change) following the equipment manual.3. Remove old oil filter counter‑clockwise, clean the mounting surface.4. Fit new AUC12916 filter: lightly coat gasket with clean engine oil. Hand‑tighten until seated, then torque to spec.5. Fill oil: install filter first → add 1 quart engine oil via dipstick tube → run engine 15 seconds → shut down, check and adjust oil level.6. Start engine and check for filter oil leaks.7. Wait several minutes after shutdown, re‑confirm oil level; top‑up if needed.
John Deere AUC12916 Lawn Tractor Oil Filter for 100 Series E/S120-180 X166/7R
$27.99
- 【Vehicle Fitment】Engine Oil Filter Fit for John Deere 100 Series lawn tractors ,including E120, E130, E150, E160, E170, E180, S120, S130, S160, S170, S180 , as well as X166R, X167, and Z365R Replaces AUC12916
- 【High-Efficiency Filtration Media】Constructed with blended cellulose and synthetic fiber filter media; traps fine metal shavings, carbon deposits and yard debris while maintaining steady oil flow; reduces premature engine wear and extends overall motor service life for seasonal mowing use
- 【Benefits】This dry filter design contains no factory pre-filled oil, so you can add manufacturer-approved motor oil matched to your equipment. It eliminates potential engine harm from stale, oxidized preloaded oil inside pre-filled filter assemblies. You get full control over oil quality to deliver long-lasting protection for your engine
- 【Installation Steps】1. Shut off engine and let it cool completely.2. Drain old oil (for full oil change) following the equipment manual.3. Remove old oil filter counter‑clockwise, clean the mounting surface.4. Fit new AUC12916 filter: lightly coat gasket with clean engine oil. Hand‑tighten until seated, then torque to spec.5. Fill oil: install filter first → add 1 quart engine oil via dipstick tube → run engine 15 seconds → shut down, check and adjust oil level.6. Start engine and check for filter oil leaks.7. Wait several minutes after shutdown, re‑confirm oil level; top‑up if needed.